Inverse-Perovskite Ba3 BO (B = Si and Ge) as a High Performance Environmentally Benign Thermoelectric Material with Low Lattice Thermal Conductivity.

High energy-conversion efficiency (ZT) of thermoelectric materials has been achieved in heavy metal chalcogenides, but the use of toxic Pb or Te is an obstacle for wide applications of thermoelectricity. Here, high ZT is demonstrated in toxic-element free Ba3 BO (B = Si and Ge) with inverse-perovskite structure. The negatively charged B ion contributes to hole transport with long carrier life time, and their highly dispersive bands with multiple valley degeneracy realize both high p-type electronic conductivity and high Seebeck coefficient, resulting in high power factor (PF). In addition, extremely low lattice thermal conductivities (κlat ) 1.0-0.4 W m-1  K-1 at T = 300-600 K are observed in Ba3 BO. Highly distorted O-Ba6 octahedral framework with weak ionic bonds between Ba with large mass and O provides low phonon velocities and strong phonon scattering in Ba3 BO. As a consequence of high PF and low κlat , Ba3 SiO (Ba3 GeO) exhibits rather high ZT = 0.16-0.84 (0.35-0.65) at T = 300-623 K (300-523 K). Finally, based on first-principles carrier and phonon transport calculations, maximum ZT is predicted to be 2.14 for Ba3 SiO and 1.21 for Ba3 GeO at T = 600 K by optimizing hole concentration. Present results propose that inverse-perovskites would be a new platform of environmentally-benign high-ZT thermoelectric materials.

Control of Hole Density in Russellite Bi2WO6 via Intentional Chemical Doping.

Based on the fundamental design concept of modulating the valence band maximum of oxides and subsequent predictions through computational approaches, several lone-pair ns2-based p-type oxide semiconductors, such as Sn2+- or Bi3+-based complex oxides, have been developed. Thus far, the bandgap can be modified via tuning of the chemical composition, whereas the hole density cannot be intentionally controlled because of the poor chemical stability of Sn2+ and/or the formation of oxygen vacancies. The inability to control hole density prohibits the design and realization of emergent electronic devices based on p- and n-type oxide semiconductors. Herein, we report the control of hole density via intentional chemical doping in polycrystalline Bi2WO6. While the holes of polycrystalline Nb- or Ta-doped Bi2WO6 are strongly trapped by grain boundaries, the hole density obtained at high temperatures monotonically increases with the increase in the doping concentration. This study provides important insights into the development of practical p-type oxide semiconductors.

Destabilization of Sn2+ 5s2 Lone-Pair States of SnO through Dimensional Crossover.

Materials exhibiting unique electronic properties arising from a characteristic crystal structure have physical properties that are sensitive to structural dimensionality. This study involves the destabilization of Sn 5s2 lone-pair states of SnO films by decreasing their structural dimensionality in the out-of-plane direction. The inherent dispersive band structure of the SnO films remained unchanged between 80 and 11 nm. Below 11 nm, their dispersive band structure disappeared, the O/Sn ratio increased, and the carrier type changed from the p type to the n type, whereas the Sn valency remained constant at +2. These unconventional changes arose from the electronic separation corresponding to the Debye length, which is proportional to permittivity, and were attributed to weakened interactions between Sn 5s2 lone-pair electrons. Therefore, designing low-permittivity materials is beneficial for reducing the crystallite size required for stabilizing lone-pair states. These results are essential for designing emergent p-type oxides and improving their semiconducting properties and performance in transparent or high-power electronics.

Design, Synthesis, and Optoelectronic Properties of the High-Purity Phase in Layered AETMN2 (AE = Sr, Ba; TM = Ti, Zr, Hf) Semiconductors.

We report the synthesis and optoelectronic properties of high phase-purity (>94 mol %) bulk polycrystals of KCoO2-type layered nitrides AETMN2 (AE = Sr, Ba; and TM = Ti, Zr, Hf), which are expected to exhibit unique electron transport properties originating from their natural two-dimensional (2D) electronic structure, but high-purity intrinsic samples have yet been reported. The bulks were synthesized using a solid-state reaction between AENH and TMN precursors with NaN3 to achieve high N chemical potential during the reaction. The AETMN2 bulks are n-type semiconductors with optical band gaps of 1.63 eV for SrTiN2, 1.97 eV for BaZrN2, and 2.17 eV for BaHfN2. SrTiN2 and BaZrN2 bulks show degenerated electron conduction due to the natural high-density electron doping and paramagnetic behavior in all of the temperature ranges examined, while such unintentional carrier generation is largely suppressed in BaHfN2, which exhibits nondegenerated electron conduction. The BaHfN2 sample also exhibits weak ferromagnetic behavior at temperatures lower than 35 K. Density functional theory calculations suggest that the high-density electron carriers in SrTiN2 come from oxygen impurity substitution at the N site (ON) acting as a shallow donor even if the high-N chemical potential synthesis conditions are employed. On the other hand, the formation energy of ON becomes larger in BaHfN2 because of the stronger TM-N chemical bonds. Present results demonstrate that the easiness of impurity incorporation is designed by density functional calculations to produce a more intrinsic semiconductor in wider chemical conditions, opening a way to cultivating novel functional materials that are sensitive to atmospheric impurities and defects.

High-Mobility Metastable Rock-Salt Type (Sn,Ca)Se Thin Film Stabilized by Direct Epitaxial Growth on a YSZ (111) Single-Crystal Substrate.

Metastable cubic (Sn1-xPbx)Se with x ≥ 0.5 is expected to be a high mobility semiconductor due to its Dirac-like electronic state, but it has an excessively high carrier concentration of ∼1019 cm-3 and is not suitable for semiconductor device applications such as thin film transistors and solar cells. Further, thin films of (Sn1-xPbx)Se require a complicated synthesis process because of the high vapor pressure of Pb. We herein report the direct growth of metastable cubic (Sn1-xCax)Se films alloyed with CaSe, which has a wider bandgap and lower vapor pressure than PbSe. The cubic (Sn1-xCax)Se epitaxial films with x = 0.4-0.8 are stabilized on YSZ (111) single crystalline substrates by pulsed laser deposition. (Sn1-xCax)Se has a direct-transition-type bandgap, and the bandgap energy can be varied from 1.4 eV (x = 0.4) to 2.0 eV (x = 0.8) by changing x. These films with x = 0.4-0.6 show p-type conduction with low hole carrier concentrations of ∼1017 cm-3. Hall mobility analysis suggests that the hole transport would be dominated by 180° rotational domain structures, which is specific to (111) oriented epitaxial films. However, it, in turn, clarifies that the in-grain carrier mobility in the (Sn0.6Ca0.4)Se film is as high as 322 cm2/(Vs), which is much higher than those in thermodynamically stable layered SnSe and other Sn-based layered semiconductor films at room temperature. Therefore, the present results prove the potential of high mobility (Sn1-xCax)Se films for semiconductor device applications via a simple thin-film deposition process.

Characteristic Electronic Structure of SnO Film Showing High Hole Mobility.

Actual knowledge of the intrinsic electronic characteristics of p-type oxide semiconductors should help guide the design of innovative electronic devices. The electronic characteristics of oxide semiconductors in thin-film form potentially differ from those in the bulk form owing to lattice strain. In this Letter, we report on the empirical band structure of stannous oxide (SnO) film, which has been shown to have a higher hole mobility than the theoretically expected values for SnO in the bulk form. In vacuo angle-resolved photoemission spectroscopy measurements reveal that the uppermost valence band is anisotropic between the out-of-plane and in-plane directions, and more dispersive than the theoretical predictions. Our findings unveil the underlying mechanism of the semiconductor properties of SnO films and suggest a suitable device structure based on the electronic characteristics.

Large phonon drag thermopower boosted by massive electrons and phonon leaking in LaAlO3/LaNiO3/LaAlO3 heterostructure.

An unusually large thermopower (S) enhancement is induced by heterostructuring thin films of the strongly correlated electron oxide LaNiO3. The phonon-drag effect, which is not observed in bulk LaNiO3, enhances S for thin films compressively strained by LaAlO3 substrates. By a reduction in the layer thickness down to three unit cells and subsequent LaAlO3 surface termination, a 10 times S enhancement over the bulk value is observed due to large phonon drag S (Sg), and the Sg contribution to the total S occurs over a much wider temperature range up to 220 K. The Sg enhancement originates from the coupling of lattice vibration to the d electrons with large effective mass in the compressively strained ultrathin LaNiO3, and the electron-phonon interaction is largely enhanced by the phonon leakage from the LaAlO3 substrate and the capping layer. The transition-metal oxide heterostructures emerge as a new playground to manipulate electronic and phononic properties in the quest for high-performance thermoelectrics.

Bipolar Semiconducting Properties in α-SnWO4 Based on the Characteristic Defect Structure.

Diodes, memories, logic circuits, and most other current information technologies rely on the combined use of p- and n-type semiconductors. Although oxide semiconductors have many technologically attractive functionalities, such as transparency and high dopability to enable their use as conducting films, they typically lack bipolar conductivity. In particular, the absence of p-type semiconducting properties owing to the innate electronic structures of oxides represents a bottleneck for the development of practical devices. Here, bipolar semiconducting properties are demonstrated in α-SnWO4 within a 100 °C temperature window after appropriate thermal treatment. Comprehensive spectroscopic observations reveal that Sn4+ is present in p-type α-SnWO4 in a notably greater quantity than in n-type. This result strongly suggests that the Sn4+ substitutional defects on the W6+ sites contribute to hole-carrier generation in α-SnWO4. We also find that oxygen vacancies are initially formed in Sn-O-W bonds and migrate to W-O-W bonds with changes in semiconducting properties from p-type to n-type. These findings suggest useful strategies for exploring p-type oxide semiconductors and controlling their carrier type by utilizing the octahedral structure.

Thickness-induced metal to insulator transition in Ru nanosheets probed by photoemission spectroscopy: Effects of disorder and Coulomb interaction.

We investigated the electronic structures of mono- and few-layered Ru nanosheets (N layers (L) with N = 1, ~6, and ~9) on Si substrate by ultra-violet and x-ray photoemission spectroscopies. The spectral density of states (DOS) near EF of ~6 L and 1 L is suppressed as it approaches EF in contrast to that of ~9 L, which is consistent with the Ru 3 d core-level shift indicating the reduction of the metallic conductivity. A power law g(ε) ∝ |ε - εF|α well reproduces the observed spectral DOS of ~6 L and 1 L. The evolution of the power factor α suggests that the transition from the metallic state of ~9 L to the 2-dimensional insulating state with the soft Coulomb gap of 1 L through the disordered 3-dimensional metallic state of ~6 L.

Development of a high-precision XYZ translator and estimation of beam profile of the vacuum ultraviolet and soft X-ray undulator beamline BL-13B at the Photon Factory.

A high-precision XYZ translator was developed for the microanalysis of electronic structures and chemical compositions on material surfaces by electron spectroscopy techniques, such as photoelectron spectroscopy and absorption spectroscopy, utilizing the vacuum ultraviolet and soft X-ray synchrotron radiation at an undulator beamline BL-13B at the Photon Factory. Using the high-precision translator, the profile and size of the undulator beam were estimated. They were found to strongly depend on the photon energy but were less affected by the polarization direction. To demonstrate the microscopic measurement capability of an experimental apparatus incorporating a high-precision XYZ translator, the homogeneities of an SnO film and a naturally grown anatase TiO2 single crystal were investigated using X-ray absorption and photoemission spectroscopies. The upgraded system can be used for elemental analyses and electronic structure studies at a spatial resolution in the order of the beam size.

In-gap state generated by La-on-Sr substitutional defects within the bulk of SrTiO3.

Local distortion in the conduction pathway has a significant influence on the conducting properties of oxides. The electronic states induced in the band gap of SrTiO3 by La doping were investigated using photoemission spectroscopy (PES) and soft X-ray emission spectroscopy (SXES); moreover, the local distortion in the conduction pathway was examined using extended X-ray absorption fine structure (EXAFS). An itinerant state and a localized state were observed as a metallic state and an in-gap state, respectively, in the PES spectra and as inelastic peaks in the SXES spectra. This implied that the itinerant state and the in-gap state coexisted within the bulk. From EXAFS results, it was observed that La doped into SrTiO3 substituted Sr and locally distorted the conduction pathway. The results showed that some electrons doped by La-on-Sr substitution are trapped/localized by the local distortion in the conduction pathway, whereas the remaining doped electrons itinerate in the pristine conduction pathway with no distortion.

Emergence of Quantum Critical Behavior in Metallic Quantum-Well States of Strongly Correlated Oxides.

Controlling quantum critical phenomena in strongly correlated electron systems, which emerge in the neighborhood of a quantum phase transition, is a major challenge in modern condensed matter physics. Quantum critical phenomena are generated from the delicate balance between long-range order and its quantum fluctuation. So far, the nature of quantum phase transitions has been investigated by changing a limited number of external parameters such as pressure and magnetic field. We propose a new approach for investigating quantum criticality by changing the strength of quantum fluctuation that is controlled by the dimensional crossover in metallic quantum well (QW) structures of strongly correlated oxides. With reducing layer thickness to the critical thickness of metal-insulator transition, crossover from a Fermi liquid to a non-Fermi liquid has clearly been observed in the metallic QW of SrVO3 by in situ angle-resolved photoemission spectroscopy. Non-Fermi liquid behavior with the critical exponent α = 1 is found to emerge in the two-dimensional limit of the metallic QW states, indicating that a quantum critical point exists in the neighborhood of the thickness-dependent Mott transition. These results suggest that artificial QW structures provide a unique platform for investigating novel quantum phenomena in strongly correlated oxides in a controllable fashion.

Reversible Changes in Resistance of Perovskite Nickelate NdNiO3 Thin Films Induced by Fluorine Substitution.

Perovskite nickel oxides are of fundamental as well as technological interest because they show large resistance modulation associated with phase transition as a function of the temperature and chemical composition. Here, the effects of fluorine doping in perovskite nickelate NdNiO3 epitaxial thin films are investigated through a low-temperature reaction with polyvinylidene fluoride as the fluorine source. The fluorine content in the fluorinated NdNiO3-xFx films is controlled with precision by varying the reaction time. The fully fluorinated film (x ≈ 1) is highly insulating and has a bandgap of 2.1 eV, in contrast to NdNiO3, which exhibits metallic transport properties. Hard X-ray photoelectron and soft X-ray absorption spectroscopies reveal the suppression of the density of states at the Fermi level as well as the reduction of nickel ions (valence state changes from +3 to +2) after fluorination, suggesting that the strong Coulombic repulsion in the Ni 3d orbitals associated with the fluorine substitution drives the metal-to-insulator transition. In addition, the resistivity of the fluorinated films recovers to the original value for NdNiO3 after annealing in an oxygen atmosphere. By application of the reversible fluorination process to transition-metal oxides, the search for resistance-switching materials could be accelerated.

Isotropic Kink and Quasiparticle Excitations in the Three-Dimensional Perovskite Manganite La_{0.6}Sr_{0.4}MnO_{3}.

In order to reveal the many-body interactions in three-dimensional perovskite manganites that show colossal magnetoresistance, we performed an in situ angle-resolved photoemission spectroscopy on La_{0.6}Sr_{0.4}MnO_{3} and investigated the behavior of quasiparticles. We observed quasiparticle peaks near the Fermi momentum in both the electron and the hole bands, and clear kinks throughout the entire hole Fermi surface in the band dispersion. This isotropic behavior of quasiparticles and kinks suggests that polaronic quasiparticles produced by the coupling of electrons with Jahn-Teller phonons play an important role in the colossal magnetoresistance properties of the ferromagnetic metallic phase of three-dimensional manganites.

Tuning Band Alignment Using Interface Dipoles at the Pt/Anatase TiO2 Interface.

The Schottky barrier heights at the Pt/TiO2 (001) junctions are modulated over 0.8 eV by inserting <1 nm of LaAlO3. The large electric field in the LaAlO3 is stabilized by preserving the continuity of in-plane lattice symmetry at the oxide interface. These results greatly expand the application of dipole engineering to versatile polycrystalline metal/binary oxide functional interfaces.

Controlling band alignments by artificial interface dipoles at perovskite heterointerfaces.

The concept 'the interface is the device' is embodied in a wide variety of interfacial electronic phenomena and associated applications in oxide materials, ranging from catalysts and clean energy systems to emerging multifunctional devices. Many device properties are defined by the band alignment, which is often influenced by interface dipoles. On the other hand, the ability to purposefully create and control interface dipoles is a relatively unexplored degree of freedom for perovskite oxides, which should be particularly effective for such ionic materials. Here we demonstrate tuning the band alignment in perovskite metal-semiconductor heterojunctions over a broad range of 1.7 eV. This is achieved by the insertion of positive or negative charges at the interface, and the resultant dipole formed by the induced screening charge. This approach can be broadly used in applications where decoupling the band alignment from the constituent work functions and electron affinities can enhance device functionality.

Enhanced electrical transparency by ultrathin LaAlO3 insertion at oxide metal/semiconductor heterointerfaces.

We demonstrate that the electrical conductivity of metal/semiconductor oxide heterojunctions can be increased over 7 orders of magnitude by inserting an ultrathin layer of LaAlO3. This counterintuitive result, that an interfacial barrier can be driven transparent by inserting a wide-gap insulator, arises from the large internal electric field between the two polar LaAlO3 surfaces. This field modifies the effective band offset in the device, highlighting the ability to design the electrostatic boundary conditions with atomic precision.

Atomically engineered metal-insulator transition at the TiO2/LaAlO3 heterointerface.

We demonstrate that the atomic boundary conditions of simple binary oxides can be used to impart dramatic changes of state. By changing the substrate surface termination of LaAlO3 (001) from AlO2 to LaO, the room-temperature sheet conductance of anatase TiO2 films are increased by over 3 orders of magnitude, transforming the intrinsic insulating state to a high mobility metallic state, while maintaining excellent optical transparency.